|
| Free drop shipping: This manufacturer will drop ship orders. Since shipping to OxAero is already factored into our prices and since shipping to you is about the same expense, we will drop ship to you at no charge. This is the standard shipping method for out-of-stock items and it is optional for you even for in-stock items. Drop shipping uses the most economical method offerred by this manufacturer, so the wait may be longer for in-stock items. |
| Price Fluctuations: This is an overseas manufacturer, so prices on this page vary with the currency exchange rate. Your price is fixed when you place your order. However, if the price on this page drops within a week after your order ships, you may notify us and we will issue a credit for the difference. |
|
Microair T2000SFL Transponder
—5% Off
This TSO'd & JTSO'd transponder is one of the world's smallest and lightest of its kind, weighing only 21.1oz (600 gms). The T2000SFL has very low power consumption and many new innovative safety features only found in much larger and expensive transponders. The T2000SFL has attracted so much attention around the world, that Microair has had to build another factory to double production. The T2000 carries a repair/service/replacement warranty for one year from purchase or last warranty service. Microair recommends the Ameri-King Altitude Encoder for use with this transponder. |
User Manual
Installation Manual Data Sheet |
| TSO Compliance | C74c Class 1a |
| Environmental Compliance | DO-160D |
| Software Level | C |
| Input Voltage | 10–33 Volts DC (negative chassis ground) |
| Current Load | 80 mA RX 250 mA TX at 27.5 V 400 mA TX at 13.75 V |
| Peak Power Output | 178 watts (minimum) 200 (nominal) 250 (maximum) |
| Mounting | 2 ¼” (57mm) diameter instrument hole |
| Weight | 21 ounces (600 grams) |
|
Microair EC2002 Altitude Encoder
Microair Avionics is pleased to announce the EC2002 altitude encoder. The EC2002 accurately reports altitude over a calibrated altitude range of -1000 to +35,000ft. The altitude output is via the 10 line Gillham Gray code, and a 2 line serial data output. The EC2002 has the lowest power requirements of any altitude encoder today. Typical current consumption is 15–115 mA. This makes the EC2002 the logical choice for battery only operators. The EC2002’s small size and light weight (only 103g / 3.6oz) makes installation simple. The chassis is flanged, and pre-drilled with mounting holes. Connections consist of a DB-15 connector, and a 1/8” NPT fitting for the static air pressure connection. The EC2002 matches the pin assignments of many popular encoders to make replacement simple. The EC2002’s serial and parallel altitude outputs are compatible with all ATC transponders currently available. Brochure and Data Sheet (PDF, 148 kb) |
|
TED Transponder Antenna
Microair Avionics recommends the TED antenna for use with the T2000SFL transponder. The TED is not a TSO'd product, it is suitable only for use on experimental and non-certified aircraft. |
|
RAMI AV-22 Transponder Antenna
Microair Avionics recommends the RAMI AV-22 transponder antenna for use with the T2000SFL transponder. The AV-22 is TSO'd and approved for use on certified aircraft. |
Microair T2000 Antenna Coax Kit - 3.2 m
|
|
Microair T2000 Wiring Harness
The T2000 Wiring Harness makes installation easy. Simply plug into the T2000, and the encoder, then take the red and black wires to power. That's it. |
|